A drop ceiling is typically installed in a basement in lieu of attaching drywall to the ceiling. The use of a drop ceiling allows easy access to the underside of the floor above for electrical or plumbing maintenance. When you need to expose a section of the drop ceiling you can simply remove a ceiling tile. You can also completely take apart the drop ceiling to access the floor joists and make repairs.
Instructions
Remove Ceilling Tile
1. If the ceiling is too high for you to reach, set the ladder underneath and climb it to remove the tiles.
2. Press on one edge of the tile to force it up.
3. Place one hand on the center of the tile and push straight up. The tile should pop out of its frame.
4. Lift the tile up so that it clears the framing. Turn the tile so that it is on an angle and then lower it down through the opening.
Take Apart the Drop Ceiling
5. Remove all of the ceiling tiles from the framing.
6. Using wire cutters, cut the support wires that are connected to the framing.
7. Find the staples or screws that were used to secure the wires to the floor joists. Pull out the staples with the pliers. Remove the screws with the power drill.
8. Remove the screws that were used to secure the wall track, if applicable.
Tags: drop ceiling, floor joists, Remove screws, , screws that were, that were, that were used