Steel wool
So you painted a room in your home and you thought you had everything perfectly taped and covered with newspapers. Then you go back to look at your work, and you realize that paint splatters are stuck to your light fixtures. You don't need to replace the light fixture. Using the right tools will have it shining like new.
Instructions
1. Turn the light off. Heat will cause the paint stripper to react differently. If you need light to work by, move a lamp into the room or work during the day.
2. Apply a generous amount of paint stripper to the splatters using a paint brush. Don't use a good-quality brush. The brush will be ruined by the paint stripper and will have to be thrown out after this project. Place a sheet of tin foil around the paint stripper to keep it from drying too quickly. This speeds up the chemical process.
3. Allow the to soften the splatters. Test to see if the stripper has done its job by scraping the paint splatters with a scraper. If the paint begins to come off then the chemicals are working.
4. Rub the splatters in a circular motion using extra-fine steel wool. The scraper can be used on flat surfaces but can be difficult to handle properly over curved edges and detail work. Use the steel wool on rounded areas.
5. Use a toothbrush coated with more paint stripper to get into tiny crevices.
6. Use a damp cloth to remove all traces of the paint stripper from your light fixture.
Tags: paint stripper, light fixture, paint splatters, steel wool, will have