Thursday, January 19, 2012

Remove The Top Or Lid On An Lg Washing Machine







Your LG washer lid may need removal for repairs.


Although washing machines are built for reliability, eventually you're bound to have a problem with yours. To access most of the parts inside most front-loading washing machines, you will have to remove the machines' top panel. This is true of an LG-brand front-loader. Almost every repair, from taking off the control panel to replacing belts, starts with this step. Luckily, LG makes the removal of the top one of the easiest tasks possible. Always follow the proper steps of removal to prevent breaking any of the tabs that hold the lid in place. Broken tabs may cause the lid to rattle during use.


Instructions


Front-Load Machines


1. Unplug the unit from the wall.


2. Pull the washer out from the wall.


3. Turn off the water supply by turning the cold and hot water knobs clockwise.


4. Turn the hose connections with a wrench to loosen them, then unscrew the connections by hand and remove them.


5. Remove the screws along the back of the lid.








6. Lift the panel at the back of the machine. Push the front of the lid forward, toward the back of the unit, and lift the lid off.


7. Slide the front of the top underneath the retaining clips and reinstall the screws when putting the lid back on. Connect the water lines.


Top-Load Machine


8. Unplug the unit from the wall.


9. Slide a putty knife under the top panel of the machine, near the edges of the machine, to press down the springs on the inside.


10. Lift up on the top to release it from the cabinet.


11. Pull on the control panel wires at the connector to disconnect the top from the rest of the machine. Lift the top out.

Tags: from wall, control panel, unit from, unit from wall, Unplug unit