Wednesday, August 8, 2012

Make New Wood Look Old

Distress new wood to give it an aged, weathered look.


Make a newly built woodworking project look decades, even centuries, old rather than fresh from the home improvement store, by employing a few antiquing techniques. Do-it-yourself antiquing techniques "age" new wood and give it a worn, weathered appearance. From adding rustic wood beams to your kitchen ceiling to building a primitive garden bench that needs to look old, these wood-aging techniques can be used for just about any project involving new wood.


Instructions


1. Coat the wood with brown shoe polish if you want the wood it to appear slightly aged. Use a shoe polish brush to wipe the polish back and forth across the wood grain so that the polish really settles into the wood. This technique works nicely for small wood projects such as wooden birdhouses.


2. Determine where natural areas of wear and tear would exist on your wood if it were, in fact, old. (Some examples include seat edges, corners and cabinet doors.) Then use a paper towel to rub candle wax, paste wax or petroleum jelly into those wear-and-tear areas to give the wood a distressed look. Paint over the entire wood surface (including the areas that you waxed) using the latex paint color of your choice.


After the paint is dry, use a paper towel to wipe in a side-to-side motion over the areas that you waxed. You will start to see the wood grains under the paint, which gives your wood piece a distressed, aged look. After you are pleased with the look of your piece, coat it with mineral spirits, a natural de-waxer, using a paintbrush.


3. Carefully burn certain areas of the wood using a blowtorch. This will give your wood that darkened, worn look popular on many primitive hutches, corner cabinets and farm tables.


4. Give your wood that century-old barn look that is weathered and worn with dents and blemishes by beating the wood with a hammer to create nicks and scratch marks. Then hit it with a chain and rub it with fine-grit sandpaper to achieve even more bangs and dents. Lastly, use a large wire brush to wipe the wood with the grain. This will give the wood a time-weathered appearance that will even fool Mother Nature.


5. Don a protective mask and gloves. Spray your wood with a lye-based oven cleaner for an old, gray wood look. Use the cleaner outdoors or in a well-ventilated area. Wipe off the excess cleaner and add a coating of white vinegar using a paintbrush. The white vinegar will neutralize the lye-based cleaner.

Tags: your wood, wood with, antiquing techniques, areas that, areas that waxed