Wednesday, September 26, 2012

Install Acoustic Ceiling Tiles

Acoustic ceiling tiles are so-named because they tend to obstruct or at least soften sound vibrations. Acoustic tiles are especially effective at stopping the reverberation of sounds to reduce echo effects and the transmission of sounds to other rooms. Installing acoustic tiles should not be considered any more complicated or frustrating than installing other types of ceiling tile.


Instructions


Installing Acoustic Ceiling Tile


1. Measure the ceiling by locating the center points of the walls and drawing a line that connects them onto the ceiling. Mark off 3 feet from the center line on line of the lines and 4 feet on the adjacent line. Connect these points. This connection line should measure 5 feet exactly. If the line isn't five feet, go back and adjust the lines until the measurements adhere to the 3, 4, 5 feet rule.


2. Scrape away any loose paint on the ceiling. Fill in any holes with ceiling spackle and sand until smooth. Any wallpaper or wallpaper border that was left uncut and rises onto the ceiling should be removed.


3. Apply a dab of adhesive no larger than a sizable nut onto the corners and directly on the center of the tile. Position the tile along a guide line located on the edge of the ceiling and make sure you get it exactly right before pressing it into place.


4. Work your way toward the center line you drew on the ceiling, installing one row of tile at a time. Complete each successive row until half the ceiling has been completed. At that point, start again from a corner in the half of the room.


5. Install all complete tiles first. If it becomes necessary to cut tiles to be fitted around the edges, this can usually be accomplished with a sharp knife. Be sure to score the tile beforehand to facilitate an easier and smoother cut.

Tags: center line, onto ceiling