Pull chains on a ceiling fan may need to be replaced.
Many ceiling fans include a light to optimize the ceiling space in the room. A
Instructions
1. Turn off the electricity to the room at the circuit breaker to prevent shocks while working on the ceiling fan.
2. Unscrew the globes and bulbs from the ceiling fan by hand.
3. Remove the screws that hold the canopy to the ceiling light. Hold it from the bottom as you unscrew the canopy. Try to keep the screws form falling on the floor. Pull the canopy off.
4. Unscrew the light switch from the canopy plate by removing the nut that holds it in place. Remove the wire connector that holds one end of the switch in place, and cut the wire using your pliers at the other end of the switch.
5. Strip the end of the cut wire and attach it to the new wire switch using a wire connector. Attach the other end of the switch to the wire exposed when the other wire connector was removed from the old switch.
6. Tighten down the new switch using the, nut and reassemble the ceiling fan.
Tags: wire connector, other switch,