Most ceiling fans are equipped with light fixtures.
Many ceiling fans have attached light fixtures and they occasionally require a replacement bulb. Ceiling fans use a wide variety of bulb types, and it is important to select the correct replacement bulb. The motion of a ceiling fan causes vibration that can limit the lifetime of light bulbs, so burned out bulbs can be more common than in standard light fixtures. If your ceiling fan does not have an attached light fixture, many fans have upgrade kits that are available at a local home improvement center.
Instructions
1. Turn off the power before working on a ceiling fan.
Switch off the ceiling fan at the wall switch.
2. Remove any light fixture globes or light covers. A small set screw along the rim of the glass typically secures the globes. Loosen or remove this screw and gently remove the glass.
3. Remove the existing bulb by turning it counterclockwise. A jar-gripper may provide a better grip on hard-to-reach bulbs. Wear gloves to avoid injury from broken glass.
4. Inspect the light socket for cracks, frayed or exposed wires, burn marks or other signs of damage. Replace or repair the socket as required.
5. Use caution when switching from incandescent bulbs to CFLs.
Procure a new light bulb. This bulb should match the existing bulb in size and type. The maximum wattage usually is marked inside the fixture, and you should not exceed this wattage. Some ceiling fans use bulbs with a smaller base than standard lighting. A selection of bulbs is available at most home improvement centers.
If the light fixture has a dimming feature, use caution if replacing existing incandescent bulbs with compact fluorescent lights (CFLs). Most CFLs will burn out if they are dimmed, although bulbs are available that can tolerate dimmers. Some ceiling fans are available with special light fixtures that support dimmable CFLs. Always consult your owner's manual for advice on bulb replacement.
6. Insert the new bulb into the fixture and tighten securely by turning it clockwise.
7. Replace any globes or covers and reinstall any set screws loosened or removed.
Tags: ceiling fans, light fixtures, light fixture, attached light, bulbs available